Acer V173 - Connector Pin Assignment (DVI)

18
7.3 Factory Mode
HOT KEY OPERATION
FUNCTION
AUTO
e Color
◄ ► MENU POWER
FACTORY MODE
● ●
ON
Press [e Color ] & [MENU] at the
same time, and then press
[POWER] for DC power on. OSD
menu will be shown with “F” on the
left top. Select “F” for entering
factory mode.
◆Flowin
g
chart
After connecting, AC
ON, DC ON
Open ISP program
Choose manufacturer
and model of FW IC
LOAD FW files
Click program
button
Beginning
programming
Turn off power if
programming is OK
OK
OK
OK
OK
OK
OK
NG
Choose Config
and adjust
programming