Acer V173 - Page 61

60
S14
Twist Hexagonal
screws
(1). Handle hexagonal screws and
electric opener
(2). Twist screw in the interface like the
attached Picture1.
(3). Place cushion on the designated
location after iron frame is taken away.
S15 Fix chassis
Thread lamp wire into the relevant hole of
chassis like the attached Picture
S16 Insert FFC cable
1.Tear off the adhensive tape of FFC
wire;
2.Insert FFC wire into the interface of
panel
3.Put FFC wire in order and paste them
on the panel
4.Fix chassis on the back of panel
S17 Insert keypad Cable
1)Insert keypad wire into the relevant PIN
in the keypad
（
2)Fix button on the relevant position of
assemble
（
3)Confirm if keypad is inserted properly
2
1
34