4 Upgrading your computer42
4 Remove the bracket.
5 Remove the riser card from its protective packaging.
6 Align the riser card to the PCI Express slot (and PCI slot if necessary).
Make sure that the card is properly seated.
7 Remove the expansion card from its protective packaging.
8 Align the expansion card with the slot on the riser card, and firmly press it.
Make sure the expansion card is properly seated.
9 Secure the card to your computer with the bracket screw you
removed earlier.
10 Replace the computer cover.
When you turn on the computer, BIOS automatically detects and assigns
resources to the newly installed devices.
To Next Page
Loading...
