What to do if pressing the power switch does not turn on my Acer Desktop?
If pressing the power switch doesn't turn on your Acer Desktop, check the power override switch at the back of the machine, just above the power cable connector, to ensure it is not set to OFF.
What to do if my Acer Veriton 7600G shows 'Keyboard Error Or No Keyboard Present'?
If your Acer Desktop displays a 'Keyboard Error Or No Keyboard Present' message, it means the system can't initialize the keyboard. Ensure the keyboard is correctly connected and that no keys are being pressed during the Power-On Self-Test (POST).
What to do if my Acer Veriton 7600G says 'CMOS Checksum Error - defaults loaded'?
If your Acer Desktop displays a 'CMOS Checksum Error', it means the system has loaded default settings because the CMOS checksum is incorrect, possibly indicating CMOS corruption or a weak battery. Check the battery and replace it if necessary.
Why does my Acer Veriton 7600G say 'HARD DISK INSTALL FAILURE'?
The 'HARD DISK INSTALL FAILURE' message on your Acer Desktop indicates that the system can't find or initialize the hard drive controller or the drive itself. Make sure the controller is correctly installed. If no hard drives are installed, ensure the Hard Drive Selection in Setup is set to NONE.
What to do if my Acer Veriton 7600G keyboard is locked out?
If your Acer Desktop keyboard is locked out, it means one or more keys were pressed during the keyboard tests. Make sure no objects are resting on the keyboard.
What to do if the processor fan does not run on my Acer Desktop?
If the processor fan on your Acer Desktop isn't running but the power supply fan is, first ensure the system isn't in power-saving mode. With the system powered on, measure the voltage of the processor fan connector; it should read +12Vdc. If the voltage is normal but the fan still doesn't work, replace the fan.
What to do if my Acer Veriton 7600G Desktop CD/DVD-ROM drive cannot load or eject?
If your Acer Desktop CD/DVD-ROM drive cannot load or eject when the system is on and the eject button is pressed and held, disconnect all cables from the CD/DVD-ROM drive except the power cable, then press the eject button to try to unload the disk.
What to do if my Acer Desktop shows an incorrect memory size?
If your Acer Desktop displays an incorrect memory size or repeats it during POST, properly insert the memory modules into the DIMM sockets, then reboot the system.
How do I fix a floppy disk failure on my Acer Veriton 7600G Desktop?
If your Acer Desktop reports a floppy disk failure, it means the system cannot find or initialize the floppy drive controller or the drive. Ensure the controller is correctly installed. If no floppy drives are installed, make sure the Diskette Drive selection in Setup is set to NONE or AUTO.
What does 'Display switch is set incorrectly' mean on my Acer Desktop?
The message 'Display switch is set incorrectly' on your Acer Desktop means that the display switch on the motherboard is set to either monochrome or color incorrectly. Determine the correct setting, then turn off the system and change the jumper, or enter Setup and change the Video selection.
Details hardware components like processor, memory, chipset, graphics, and ports.
Step-by-step instructions for connecting essential computer peripherals like mouse, keyboard, and monitor.
Essential safety and preparation steps before installing or removing computer components.
Guide on how to install or remove DDR DIMM memory modules for system upgrades.
Step-by-step instructions for safely replacing the computer's hard disk drive.
Procedures for installing new expansion cards into available PCI slots.
Procedures for restoring the computer to its original factory default settings using recovery options.
Answers and solutions to common problems encountered during computer operation.
Critical safety guidelines and warnings for operating and maintaining the computer safely.
Step-by-step instructions for cleaning the computer, keyboard, pointing device, and monitor.
Detailed guides on creating, deleting, and resetting RAID volumes using the Intel RAID Option ROM utility.
Guide on installing the Intel Application Accelerator RAID utility for Windows XP.
General| Storage | 3.5" SATA Hard Disk Drive |
|---|---|
| Operating System | Windows XP |
| Chipset | Intel Q965 Express |
| Optical Drive | DVD-ROM |
| Networking | Gigabit Ethernet |
| Ports (Front) | 2 x USB 2.0, Headphone, Microphone |
| Ports (Rear) | 4 x USB 2.0, Serial, Parallel, Ethernet, VGA |
| Form Factor | Tower |
To Next Page
