119
ATA)
Note: Proper support; BIOS provides a BIOS setup option for
user selection of Native Mode or Legacy Mode.
BIOS Configuration
The Intel RAID Option ROM should be integrated with the
system BIOS on all motherboards with a supported Intel
chipset. Press <Ctrl> + <I> to enter the Intel
(R)
RAID for Serial
ATA status screen, which should appear early in system boot-
up, during the POST (Power-On Self Test).
Using the Intel RAID Option ROM
Creating, Deleting and Resetting RAID Volumes
The Serial ATA RAID volume may be configured using the RAID
Configuration utility located on the Intel RAID Option ROM.
During the Power-On Self Test (POST), the following screen will
appear for a few seconds:
Note: The “Drive Model,” “Serial #,” and “Size” shown in
the above example may differ from your system
configuration.
To Next Page
Loading...
