5 System utilities
90
BIOS utility
The BIOS utility is a hardware configuration program built into
your computer's Basic Input/Output System (BIOS). Since most
computers are already properly configured and optimized,
there is no need to run this utility. However, if you encounter
configuration problems and get the "Run Setup" message, you
will need to run this utility.
Note: Before you run BIOS, make sure that you have saved
all open files. The computer reboots immediately after you
exit Setup.
To run the BIOS utility, press the Del key on your keyboard
during computer boot up.
To Next Page
Loading...
