Need help?Do you have a question about the Acer Veriton S480G and is the answer not in the manual?
Details on supported operating systems for the Veriton system.
Information about the CPU type, socket, and FSB.
Details on the motherboard chipset, specifically Intel G43 + ICH10R.
Specifications for the Printed Circuit Board, including form factor and dimensions.
Details on memory type, slots, capacity, and supported speeds.
Information on PCI Express slot types and quantities.
Specifications for the Floppy Disk Drive, including slot quantity and design criteria.
Details on SATA interface type, slot quantity, and supported drives.
Information on audio controller, channel, codec, and connector support.
Details on LAN controller, MAC controller, and PHY.
Specifications for USB controller type, ports quantity, and data transfer rates.
Information on BIOS type, size, and boot support features.
Details on Super I/O controller and rear I/O connectors.
Lists the specific connectors found on the rear panel of the system.
Lists various internal connectors available on the motherboard.
Details on power supply mounting, electrical design, and features.
Details on processor type, socket, FSB, and minimum operating speed.
Information on BIOS code programmer, version, ROM type, and boot support.
Lists hotkeys and their functions for accessing BIOS setup utility.
Identifies major chips on the motherboard and their specifications.
Details on memory slot number, size per socket, type, voltage, and module package.
Explains power management for hard disk drives and resume methods.
Details power management timers and resume methods for global standby.
Describes power management for CPU, disk drives, and I/O during suspend.
Outlines ACPI specification and support for sleep states.
Provides essential pre-disassembly checks and safety guidelines.
Instructions on how to disassemble the system for service.
Step-by-step guide to removing the computer's side cover.
Procedure for safely removing the CPU fan and its pipe.
Instructions for removing expansion cards from the PCI/PCIe slots.
Guide on disconnecting data cables from Hard Disk Drives.
Procedure for removing the data cable from the Optical Disk Drive.
Instructions for disconnecting the power cable from Hard Disk Drives.
Guide on removing various internal cables like front panel and audio.
Steps for physically removing the Hard Disk Drive from its bay.
Procedure for disconnecting the Floppy Disk Drive cable.
Instructions for removing the card reader module from the chassis.
Steps for removing the Optical Disk Drive from its bay.
Procedure for removing the system cooling fan.
Steps for removing the motherboard from the computer chassis.
Guide on how to detach the CPU cooler assembly from the motherboard.
Instructions for removing RAM modules from the DIMM slots.
Steps for safely removing the Central Processing Unit.
Guide on removing the I/O shield from the computer case.
Explanation of how to set jumpers for system configuration.
Procedure for clearing the CMOS settings via jumper.
Details on various connectors like CPU_FAN, SYS_FAN, and ATX power.
Information on front panel headers, USB, and audio connectors.
Pinout and signal details for the Floppy Disk Drive connector.
Visual representation of system components with part numbers.
List of FRU components categorized by type like Mainboard, CPU, Memory, etc.
Steps to create a RAID 0 volume using Intel Matrix Storage Console in Windows.
Steps to create a RAID 0 volume using Intel RAID setup utility in DOS.
To Next Page
General
