23
2. Connection(DC on the monitor)
3. Install USB driver.
4. Prepare the EDID written.
4.1. Change the EDID files name as below rule.
Analog EDID WA.dat HDMI EDID WH.dat
HDMI2 EDID WH2.dat
4.2. Copy these files to one folder named as Acer VG270 which must contains “config.ini” file.
4.3. Copy Acer VG270 to DDC folder and put DDC and ISP tool together.
4.4 Setting the Config as below.
To Next Page
Loading...
