Acer X32 - Attaching the Monitor to the Base; Attaching the Monitor on the Wall

2
English
1. Connect the VESA Adapter Mounting
Kit with screws(M4x16mm 4pcs).
Remark:
2. Co nnect the monitor onto the wall.
Attaching the monitor on the wall
Attaching the monitor to the base
1. Unpack the box. Take out the Styrofoam
side by side and set flat on the desktop.
3. Remove the top styrofoam.
4.Install the stand onto the base and fasten it
with the thumb screw from the bottom of the
base.
5. Attach the base of s
tep 4 to the quick
release notch of the
OLED monitor
securely.
6. Flip the OLED monitor over to make it
stand upright on the desk where it will be
used. (Note: Do NOT
press the screen to
avoid damage any time.)
2. Take the Styrofoam with display out of the box.
Quic
k
release button
- Please check monitor weight in advance to choose suitable load capacity of VESA arm stand.
-
Do not discard the original screws as these may be needed for future use.
- The wall height should be within 2 meters.