English
19
SETUP AND INSTALLATION
Remote setup
Installing / replacing the batteries
1. Press rmly and slide the battery cover o.
2. Install new battery into the compartment. Remove the old
battery and install new one (CR2025). Ensure that the side
with a “+” is facing up.
3
V
O
L
T
S
CR2025
3. Put the cover back.
M
3
V
O
L
T
S
CR2025
Note: Replace only with the same or equivalent type batteries.
CAUTION
To ensure safe operation, please observe the following precautions:
Use CR2025 type battery.
Avoid contact with water or liquid.
Do not expose the remote control to moisture or heat.
Do not drop the remote control.
If the battery has leaked in the remote control, carefully wipe the case clean and install new battery.
Risk of an explosion if battery is replaced by an incorrect type.
Dispose of used battery according to the instructions.
This manual downloaded from http://www.manualowl.com
To Next Page
Loading...
