Acer XL2520 - Setup HDMI Link Settings Menu; Setup Test Pattern Menu; Setup Options Menu; Screen Capture by PC Tool

English
37
USING THE PROJECTOR
Setup HDMI Link settings menu
Note: When you connect HDMI CEC-compatible devices to the projector with HDMI cables, you can control them on
the same power on or power o status using the HDMI Link control feature in the projector’s OSD. This lets one
device or multiple devices in a group power on or power o via HDMI Link Feature in a typical conguration, your
DVD player may be connected to the projector through an amplier or home theater system.
HDMI
Amplier
HDMI
DVD Player
HDMI CEC
Default is O󰀨. Select “On” to enable HDMI CEC function.
Setup test pattern menu
Test Pattern
Select the test pattern from green grid, magenta grid, white grid, white or disable this function (o󰀨).
Setup options menu
Language
Select the multilingual OSD menu.
Auto Source
Choose this option to let the projector automatically nd an available input source.
High Altitude
When “On” is selected, the fans will spin faster. This feature is useful in high altitude areas where the air is thin.
Logo
Use this function to set the desired startup screen. If changes are made, they will take e󰀨ect the next time the
projector is powered on.
 Default: The default startup screen.
 User: Use the stored picture as the startup screen.
Screen capture by PC tool
1. Set “Logo” to “User”
Set the “Logo” to “User” in Setup options menu.
2. Enter download mode
Hold both “Power” and “Menu” buttons and then plug in power cord. Release the buttons until Power/
Lamp/Temp LED indicators are lighting red.
3. Connect USB cable between PC and projector
Please nd the “SERVICE” USB port and plug-in USB cable.
This manual downloaded from http://www.manualowl.com