To Next PageTo Next PageWhy is Acer X113 Projector image too small or too large?
Adjust the zoom lever on the top of the projector. Alternatively, move the projector closer to or further from the screen. You can also press "MENU" on the remote control, navigate to "Image - -> Aspect Ratio," and experiment with different settings, or press "Aspect Ratio" on the remote control to adjust directly.
How to fix Acer X113 when no image appears on screen?
First, ensure the projector is connected as described in the "Getting Started" section, and that none of the connector pins are bent or broken. Then, check if the projector lamp has been securely installed, referring to the "Replacing the Lamp" section for guidance. Finally, make sure you have removed the lens cap and that the projector is switched on.
What to do if Acer Projector image is out of focus?
First, ensure that the lens cap is removed. Then, adjust the focus ring on the projector lens. Also, make sure the projection screen is within the required distance: 3.9 to 39.0 feet (1.2 to 11.9 meters) for SVGA/XGA series, 3.3 to 32.9 feet (1.0 to 10.0 meters) for WXGA series, 3.3 to 33.8 feet (1.0 to 10.3 meters) for 720p series, or 4.9 to 32.9 feet (1.5 to 10.0 meters) for 1080p series. See the "How to Get a Preferred Image Size by Adjusting Distance and Zoom" section for more details.
How to fix partial or scrolling image on Acer Projector (for notebooks)?
First, press "RESYNC" on the remote control or control panel. If the image is incorrectly displayed, adjust your computer's resolution. Press the toggle output settings. Examples: [Fn]+[F4], Compaq [Fn]+[F4], Dell [Fn]+[F8], Gateway [Fn]+[F4], IBM [Fn]+[F7], HP [Fn]+[F4], NEC [Fn]+[F3], Toshiba [Fn]+[F5]. If you still have difficulty changing resolutions or your monitor freezes, restart all equipment, including the projector.
Why is Acer X113 Projector image stretched when displaying a widescreen DVD?
When playing a DVD encoded in anamorphic or 16:9 aspect ratio, you may need to adjust settings. If playing a 4:3 format DVD, change the format to 4:3 in the projector OSD. If the image is still stretched, adjust the aspect ratio to 16:9 (wide) on your DVD player. If playing a Letterbox (LBX) format DVD, change the format to Letterbox (LBX) in the projector OSD.
What to do if Acer X113 image has slanted sides?
If possible, reposition the projector so that it is centered on the screen. You can also press the "Keystone / " button on the remote control until the sides are vertical. If the "Keystone" button is unavailable on the remote control, press "MENU" on the remote, go to "Image - -> Auto Keystone," and choose "Off" on the OSD.
Why is the screen of my notebook computer not displaying my presentation on Acer X113?
If you're using a Microsoft® Windows® based notebook, it might deactivate its own screen when a second display device is in use. Refer to your computer's manual for reactivation instructions. If you're using an Apple® Mac® OS based notebook, open Display in System Preferences and select Video Mirroring "On".
How to fix unstable or flickering image on Acer Projector?
Adjust the "Tracking" to correct the unstable or flickering image. Also, try changing the display color depth settings on your computer.
How to fix vertical flickering bar on Acer X113 image?
Use the "Frequency" setting to make an adjustment. Additionally, check and reconfigure the display mode of your graphics card to ensure it is compatible with the projector.
What to do if Acer X113 Projector stops responding to controls?
If possible, turn off the projector, then unplug the power cord and wait at least 30 seconds before reconnecting power.
General| Number of colors | 1.073 billion colors |
|---|---|
| Native aspect ratio | 4:3 |
| Projection distance | - m |
| Projection technology | - |
| Supported aspect ratios | 4:3, 16:9 |
| Contrast ratio (typical) | 13000:1 |
| Screen size compatibility | 23 - 300 \ |
| Projector native resolution | SVGA (800x600) |
| Keystone correction, vertical | -40 - 40 ° |
| Vertical synchronization (max) | 0.12 kHz |
| Horizontal synchronization (max) | 100 kHz |
| Throw ratio | 1.95 - 2.15:1 |
| Digital zoom | 2 x |
| Zoom capability | Yes |
| Focal length range | - mm |
| Aperture range (F-F) | 2.41 - 2.55 |
| Maximum digital resolution | 1920 x 1080 pixels |
| Lamp type | OSRAM |
| Service life of light source | 5000 h |
| Service life of light source (economic mode) | 6000 h |
| Full HD | No |
| USB 2.0 ports quantity | 1 |
| Noise level | - dB |
| Placement | Desktop |
| Product type | Standard throw projector |
| Product color | Black |
| Power source | AC |
| AC input voltage | 110 - 220 V |
| Power consumption (standby) | - W |
| Power consumption (typical) | 235 W |
| Cables included | AC, VGA |
Weight and Dimensions| Depth | 223 mm |
|---|---|
| Width | 314 mm |
| Height | 93 mm |
| Weight | 2500 g |
Read instructions carefully, follow warnings, and observe safety precautions.
Guidelines for connecting and using electrical power safely.
Information on product servicing, safety risks, and important warnings.
Instructions for proper disposal of electronics and mercury advisory.
Overview of the Acer projector, its features, and package contents.
Details the projector's DLP technology, resolution, and advanced features.
List of items included with the projector.
Illustrations of projector views, parts, control panel, and remote layout.
Diagrams illustrating projector connections for different source types.
Procedure for powering the projector on, off, and managing cooling cycles.
Guidance on adjusting image height and optimizing size and distance.
Using the installation menu and OSD for setup and maintenance.
Adjusting display modes, color, brightness, contrast, and sharpness.
Configuration for security, LAN, management, audio, and 3D display.
Remote control layout and MHL control functionality.
Accessing and managing the projector via a web interface.
Guide to resolving common image problems and projector malfunctions.
Instructions for cleaning, replacing parts, and technical specifications.
Lists supported VGA, HDMI, and MHL signal modes and timings.
Device compliance with FCC rules for digital devices and radio frequency energy.
Notices for Canadian users and EU Declaration of Conformity.
Manufacturer's declaration of product compliance with EU and other directives.
