To Next PageTo Next PageHow to fix Acer X1126AH when no image appears on screen?
First, ensure the projector is connected properly. Check that none of the connector pins are bent or broken. Verify the projector lamp is securely installed. Also, confirm that you've removed the lens cap and the projector is switched on.
How to fix Acer X1126AH when LAN/WiFi, USB Display source show No signal?
Power off projector and power on again.
What to do if Acer X1126AH image is out of focus?
First, make sure that the lens cap is removed. Then, adjust the focus ring on the projector lens. Also, ensure the projection screen is within the required distance from the projector.
Why is my Acer X1126AH image stretched when displaying a widescreen DVD?
When playing a DVD encoded in anamorphic or 16:9 aspect ratio, you may need to adjust settings. If you play a 4:3 format DVD title, change the format to 4:3 in the projector OSD. If the image remains stretched, adjust the aspect ratio to 16:9 (wide) on your DVD player. For a Letterbox (LBX) format DVD title, change the format to Letterbox (LBX) in the projector OSD.
How to fix unstable or flickering image on Acer Projector?
Adjust the "Tracking" to correct the image. Change the display color depth settings on your computer.
Why is Acer Projector image too small or too large?
Adjust the zoom ring on the projector. Move the projector closer to or further from the screen. Alternatively, press "MENU" on the remote control, go to "Image - -> Aspect Ratio", and try different settings, or press "RATIO" on the remote to adjust directly.
How to fix partial, scrolling, or incorrectly displayed image on Acer Projector (for notebooks)?
Follow the steps to adjust the resolution of your computer. Press the toggle output settings. If you experience difficulty changing resolutions or your monitor freezes, restart all equipment including the projector.
What to do if Acer X1126AH stops responding to all controls?
If possible, turn off the projector, then unplug the power cord and wait at least 30 seconds before reconnecting power. Make sure that the control panel lock function is disabled.
How to fix partial, scrolling, or incorrectly displayed image on Acer X1126AH (for PC (Windows 2000/XP/Vista/ Windows 7/ Windows 8))?
For an incorrectly displayed image: Open "My Computer", open the "Control Panel", and then double-click the "Display" icon. Select the "Settings" tab. Verify that your display resolution setting is lower than or equal to WUXGA-RB (1920 x 1200). Click the "Advanced Properties" button. If the problem still appears, change the monitor display you are using and follow the steps below: Verify that the resolution setting is lower than or equal to WUXGA-RB (1920 x 1200). Click the "Change" button under the "Monitor" tab. Click "Show all devices". Next, select "Standard monitor types" under the SP box, and choose the resolution mode you need under the "Models" box. Verify that the resolution setting of the monitor display is lower than or equal to WUXGA-RB (1920 x 1200).
What to do if Acer X1126AH Projector image has slanted sides?
If possible, reposition the projector so that it is centered on the screen. You can also press the "Keystone / " button on the remote control until the sides are vertical.
General| Number of colors | 1.073 billion colors |
|---|---|
| Native aspect ratio | 16:9 |
| Projection distance | 1 - 11.8 m |
| Projection technology | DLP |
| Supported aspect ratios | 4:3 |
| Contrast ratio (typical) | 20000:1 |
| Screen size compatibility | - \ |
| Projector native resolution | SVGA (800x600) |
| Keystone correction, vertical | -40 - 40 ° |
| Vertical synchronization (max) | 0.12 kHz |
| Vertical synchronization (min) | 0.24 kHz |
| Horizontal synchronization (max) | 100 kHz |
| Horizontal synchronization (min) | 15 kHz |
| Noise level | 32 dB |
| Noise level (economic mode) | 24 dB |
| RMS rated power | 3 W |
| Number of built-in speakers | 1 |
| Lamp type | OSRAM |
| Lamp power | 220 W |
| Lamps quantity | 1 lamp(s) |
| Light source type | Lamp |
| Service life of light source | 6000 h |
| Service life of light source (economic mode) | 7000 h |
| Focus | Manual |
| Focal length range | 21.85 - 24.01 mm |
| Product type | Standard throw projector |
| Product color | Black |
| Market positioning | Portable |
| Built-in display | No |
| Analog signal format system | - |
| Power source | AC |
| AC input voltage | 100 - 240 V |
| Power consumption (standby) | - W |
| Composite video in | 0 |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Operating temperature (T-T) | 0 - 40 °C |
Weight and Dimensions| Weight | 2800 g |
|---|
Essential safety measures and warnings for product use.
Guide to connecting various devices and cables to the projector.
Step-by-step instructions for turning the projector on and off.
Charts showing optimal projector distance for desired image sizes.
Common image display issues and their resolutions.
Procedures and safety warnings for replacing the projector lamp.
Detailed technical data, including resolution and I/O ports.
Supported signal resolutions for VGA and HDMI inputs.
Information on FCC compliance, safety, and recycling.
