11
The drain pump was activated but the level in
the tank is not falling or not falling fast enough
It is taking too long to re
-
heat the boiler wa
ter
It is taking too long to fill/heat the tank
The temperature sensor measures a
value outside the normal range
The temperature sensor does not
measure a value – short circuit
A rinsing cycle was started but the
boiler level has not dropped
It is taking too long to re
-
hea
t the tank wa
ter
The soft start of the wash pump is not
functioning
The temperature sensor measures a value
outside the normal range
The boiler is not filling or is filling too slowly
The jumper on the CN10 slot is open
The tank level is too high
The boiler temperature is too high
The tank temperature is too high
Connection between keyboard and main
mother board interrupted
The temperature sensor does not
measure a value – short circuit
MESSAGE/PROMPT MEANING
ERR 01
RINSE NOT DONE
ERR 02
DRAIN TIME OUT
ERR 03
TERMOSTOP TIMEOUT
ERR 04
TANK LOAD TIMEOUT
ERR 05
TANK PROBE OPEN
ERR 06
TANK PROBE SHORT
ERR 07
BOILER PROBE OPEN
ERR 08
BOILER PROBE SHORT
ERR 09
BOILER LOAD TIMEOUT
ERR 21
BOILER RINSE ERROR
ERR 22
TANK TERMOSTOP TIMEOUT
ERR 98
MALFUNCTION: SOFT START
ERR 99
LINE SYNC LOST
ERR SP
SAFE PANEL
ERR SL
SAFE LEVEL
ERR TB BOILER
EXCESSIVE TEMPERATURE
ERR TK TANK
EXCESSIVE TEMPERATURE
Rinsing is taking too long to refill the
water level in the tank
RZ_Bedienungsanleitung_goldbee_4Sprachen_2c.qxp_Layout 1 10.03.20 16:15 Seite 11
To Next Page
Loading...
