ACKERMANN UGS 540 User Manual

BEDIENUNGSANLEITUNG FÜR GESCHIRRSPÜLMASCHINE
Seite 1 von 12
D
INHALT
KAP 1 EINLEITUNG ............................................................................................................... 2
KAP 2 INSTALLATION .......................................................................................................... 2
2.1 A
USPACKEN ...................................................................................................................... 2
2.2 A
UFSTELLUNG ................................................................................................................... 2
2.3 E
LEKTRISCHER ANSCHLUSS ............................................................................................... 3
2.4 W
ASSERANSCHLUSS ......................................................................................................... 3
2.5 A
BFLUSSANSCHLUSS ......................................................................................................... 3
2.6 K
LARSPÜLMITTEL UND SPÜLMITTEL .................................................................................... 4
2.7 D
OSIERUNG ...................................................................................................................... 4
KAP 3 RISIKEN UND WICHTIGE WARNHINWEISE ............................................................. 4
3.1 N
ORMAL WARTUNG BEDINGUNGEN .................................................................................... 4
KAP 4 BENUTZUNG DER MASCHINE .................................................................................. 5
4.1 Z
EICHEN ........................................................................................................................... 5
4.2 E
INSCHALTUNG ................................................................................................................. 5
4.3 S
PÜLZYKLUS ..................................................................................................................... 5
4.4 Z
YKLUSWAHL UND START .................................................................................................. 6
4.5 A
UTOMATISCHER ZYKLUSSTART (OPTIONAL) ...................................................................... 6
4.6 A
USSCHALTEN DER MASCHINE ........................................................................................... 6
4.7 E
NTFERNUNG DES INTEGRALFILTERS.................................................................................. 6
4.8 M
ASCHINENENTLEERUNG .................................................................................................. 7
4.9 H
ARZ-REGENERATION ....................................................................................................... 7
4.9.1 Maschinen mit eingebautem Enthärter ..................................................................... 7
4.9.2 Maschinen mit externem Enthärter .......................................................................... 7
4.10 B
ETRIEBSENDE ................................................................................................................. 7
KAP 5 WARTUNG .................................................................................................................. 8
5.1 R
EINIGUNG UND HYGIENE .................................................................................................. 8
5.2 W
ARTUNG DER FILTERGRUPPE .......................................................................................... 8
5.3 R
EINIGUNG DER SPÜLARME ............................................................................................... 8
KAP 6 SELBSTDIAGNOSE ................................................................................................... 9
KAP 7 ERWEITERTE EINSTELLUNGEN ............................................................................ 10
KAP 8 ENTSORGUNG ......................................................................................................... 11
8.1 K
ORRELTE ENTSORGUNG PRODUKTS ............................................................................... 11
Der Hersteller behält sich entsprechend der Gesetze die Eigentumsrechte am vorliegenden Dokument vor. Ohne vorherige schriftliche
Genehmigung sind die Vervielfältigung und Weitergabe dieses Dokuments verboten.
Der Hersteller behält sich das Recht vor, ohne Vorankündigung Änderungen für die Verbesserungen, die von ihm für notwendig
befunden wurden, auszuführen.
442372 UGS 540 REV.04 02-12-13 U D

ACKERMANN UGS 540 Specifications

General

Brand	ACKERMANN
Model	UGS 540
Category	Dishwasher
Language	English

Summary

Preface

Machine Installation

Unpacking the Dishwasher

Check packing condition and report any damage upon delivery.

Machine Positioning

Ensure the installation area is protected from steam and the machine is stable.

Electrical Connection

Connect the machine to the electrical supply via a suitable main switch and earthing system.

Plumbing Connection

Connect the appliance to the water network using a shut-off valve and ensure compatibility.

Drain Line Connection

Connect the drain hose to the drain line, considering height and pump requirements.

Rinse Aid and Detergent Dosing

Ensure sufficient rinse aid and detergent levels; fill feed circuits manually.

Dosing Adjustment

Adjust detergent and rinse aid pump parameters for correct dosage amounts.

Risks and Safety Warnings

Normal Service Conditions

Specifies ambient temperature, altitude, and humidity requirements for safe operation.

Machine Operation

Control Panel Legend

Identifies keys and indicators on the control panel for operation.

Starting the Machine

Steps to turn on the machine, check supplies, and initiate the filling process.

Washing Cycle Procedures

Guidelines for loading racks, pre-cleaning dishes, and washing procedures.

Cycle Selection and Start-up

How to choose the appropriate wash cycle and start the program.

Automatic Cycle Start-up

Instructions to activate or deactivate the automatic cycle start function.

Turning Off the Machine

Procedure to shut down the machine and disconnect power.

Integral Filter Removal

Steps for safely removing and accessing the integral filter.

Emptying the Machine

How to drain the machine's tank using the drain function.

Resin Regeneration

Information on resin regeneration for water softeners and salt replenishment.

End of Service Procedures

Steps for daily draining, power disconnection, and leaving the door ajar.

Maintenance and Cleaning

Cleaning and Hygiene

Periodic tasks for ensuring machine hygiene, including sanitizing treatments.

Filter Group Maintenance

Procedures for cleaning the filter group and tank at the end of the day.

Cleaning Wash Arms

Steps to remove, clean, and reattach wash arms for nozzle maintenance.

Self-Diagnosis and Error Codes

Error Code ERR 01 (Rinse Not Performed)

Rinse not performed: check plumbing, water supply, or contact service.

Error Code ERR 02 (Water Drainage Anomaly)

Water drainage anomaly: check drain tube, filters, or contact service.

Error Code ERR 03 (Boiler Temperature Reset Anomaly)

Boiler temperature reset anomaly: reset machine or contact technical service.

Error Code ERR 04 (Tank Filling Time Out)

Tank filling time out: check connections, water supply, or contact service.

Error Code ERR 05 (Tank Thermometer Anomaly - Probe Open)

Tank thermometer anomaly (probe open): reset machine or contact technical service.

Error Code ERR 06 (Tank Thermometer Anomaly - Probe Shorted)

Tank thermometer anomaly (probe shorted): restart cycle or contact technical service.

Error Code ERR 07 (Boiler Thermometer Anomaly - Probe Open)

Boiler thermometer anomaly (probe open): reset machine or contact technical service.

Error Code ERR 08 (Boiler Thermometer Anomaly - Probe Shorted)

Boiler thermometer anomaly (probe shorted): restart cycle or contact technical service.

Error Code ERR 09 (Boiler Fill Time Out)

Boiler fill time out: check water supply, run cycle, or contact service.

Alarm "RESET ATTEMPT"

Problem persists: disconnect power and contact technical service.

Alarm "SAFE"

Safety thermostats tripped; contact a technical service centre.

Alarm "SAFE LEVEL"

Tank pressure switch detected incorrect water level; contact technical service.

Alarm "NO SALT"

Salt tank is empty, add salt as per section 4.9.

Alarm "REGENERATION ON"

Resin regeneration is active, the wash cycle may take longer.

Advanced Settings and Configuration

Operating Temperature Settings

Adjust boiler and tank temperatures via specific menu options.

Parameter Configuration Menu

Access and modify various machine parameters like language, energy saving, and pump settings.

Product Disposal

Disposal of Electrical Equipment

Guidelines for environmentally safe disposal of the appliance as WEEE.