ACLAS PS1X - 7.2 Further Functions Explanation

8
1) Press to give change. See 7.2.3 Give Change Function.
2) Press to check the battery voltage when the weight is 0.
Note: Please replace the 3PCS dry batteries when the voltage is lower than 3.3V.
7.2 Further Functions Explanation
7.2.1 Diagram of Basic Operation Process
Note: 1. Please make sure the scale is on a flat and stable surface before using.
2. Please keep scale tray empty during startup.
7.2.2 Unit Price Setting Function
Press and hold [MC/Set] key for 2.5 second to enter unit price setting interface:
① Press numeric key [1] + [PLU] key to set the unit price;
② Input unit price via numeric keys [0] - [9];
③ Press [MC/Set] key to confirm the unit price;
④ Press [FIX Price] key to switch weighing unit. Press [MC/Set] key to confirm. (Skip this step if
weighing unit is no need to change);
⑤ Repeat above steps (①~④) to set 70 unit prices;
⑥ After finish unit price setting, press [MC/Set] key to exit and go back to weighing mode. Press numeric
key + [PLU] key to call out the preset unit price.
Put the commodity on the tray.
The screen will display the unit price, total price, etc.
Press numeric key + [PLU]
Press [CHG] key
Input the amount received (it must be greater than the subtotal amount)
Press [CHG] key
Input unit price via the
numeric keys.