ACME Color Fusion CF-805 User Manual

15E
3-pin XLR-plug and plug it in the DMX-output of the last fixture.
4. Each lighting unit needs to have an address set to receive the data sent by the controller.
The address number is between 0-511 (usually 0 & 1 are equal to 1).
5. 3 pin XLR connectors are more popular than 5 pins XLR.
3 pin XLR: Pin 1: GND, Pin 2: Negative signal (-), Pin 3: Positive signal (+)
5pin XLR: Pin 1: GND, Pin 2: Negative signal (-), Pin 3: Positive signal (+),
Pin4/5: Not used.
8. Fixture Cleaning
The cleaning of internal must be carried out periodically to optimize light output. Cleaning
frequency depends on the environment in which the fixture operates: damp, smoky or
particularly dirty surrounding can cause greater accumulation of dirt on the fixture’s optics.
y Clean with soft cloth using normal glass cleaning fluid.
y Always dry the parts carefully.
y Clean the external optics at least every 20 days. Clean the internal optics at least every
30/60 days.
Innovation, Quality, Performance
COLOR FUSION
CF-805
User Manual
Please read the instructions carefully before use

ACME Color Fusion CF-805 Specifications

General

Brand	ACME
Model	Color Fusion CF-805
Category	DJ Equipment
Language	English

Summary

Fixture Cleaning

DMX512 Connection

Safety Introductions

Technical Specifications

Installation

Fuse Replacement

Steps to replace the fuse in the Color Fusion unit.

How to Set the Unit

Control Panel

Overview of the fixture's control panel and its functions.

How to Control the Fixture

Universal DMX controller

Explains control via universal DMX controller and channel modes.

Master/Slave Operation

Describes linking fixtures for automatic synchronized light shows without a controller.

Easy Controller (by CA-8)

Explains using a remote controller for master/slave mode functions.

DMX512 Address Setting

By LED Display Panel

Details on setting DMX address using the fixture's LED display panel.

By CA-T DMX TESTER

Instructions for setting DMX address remotely with a CA-T DMX TESTER.

DMX 512 Address Setting Menu Functions

Addr

Function to manually set the DMX 512 address.

Auto Address

Function for automatic DMX512 address setting.

Channel Mode

Selection of DMX channel modes (4-ch to 24-ch).

Show Mode

Selection and control of built-in show modes and chase speeds.

Sound Mode

Enables or disables sound-activated mode.

Blackout Mode

Enables or disables the blackout function.

LED Display

Controls the LED display on/off status.

Color Mode

Selection of color modes and manual color mixing.

Display Inversion

Option to invert the display for ceiling or floor mounting.