ACME GEIST BSWF - Page 36

Check if the fan is damaged.
Check if there are other interference items in the fan operating range.
21. BaseFan1/2 Stop Err
Check if the fan circuit on the motherboard breaks down.
Check if the component is damaged.
22. BaseFan1/2 Too Low
Check if the fan is out of order.
Check if there are other interference items in the fan operating range.
23. BaseFan1/2 Too High
Check if the fan is out of order.
Check if the fan circuit on the motherboard breaks down.
24. HeadFan1/2/3/4/5/6/7 Start Err
Check if the fan is not running.
Check if the fan leads are installed in place or disconnected.
Check if the fan is damaged.
Check if there are other interference items in the fan operating range.
25. HeadFan1/2/3/4/5/6/7 Stop Err
Check if the fan circuit on the motherboard breaks down.
Check if the component is damaged.
26. HeadFan1/2/3/4/5/6/7 Too Low
Check if the fan is out of order.
Check if there are other interference items in the fan operating range.
27. HeadFan1/2/3/4/5/6/7 Too High
Check if the fan is out of order.
Check if the fan circuit on the motherboard breaks down.
28. ArmFan1 Start Err
Check if the fan is not running.
Check if the fan leads are installed in place or disconnected.
Check if the fan is damaged.
Check if there are other interference items in the fan operating range.
35C