ACME SH2102 - Connection Modes

6
App design and functionality might
be dierent after updates.
6) The LED indicator turns purple after triggering the sensor (by taking apart
the magnet from the body) or clicking the tamper button if the device is not
connected to a Wi-Fi network. If the LED indicator turns blue, the device is
connected to a Wi-Fi network.
Connection modes
EZ (easy mode) mode: the Door/Window Sensor directly connects to your home
router.
AP (access point) mode: the Door/Window Sensor creates an access point which
connects to the smartphone and to your home router.
Unpairing:
Press and hold the button on the device for 5 s to unpair it from your smartphone
or use the application Remove Device button in the device settings menu.
Reset:
Open the application device menu and go to Settings, then click Restore
Manufacturer Defaults.
Dierent modes are necessary for particular router types. Try one or
another if it does not work with the rst try.
Features
Notications – sends notications about open/
closed/tempered alarm/low battery events.
Remote access – check the status of door/
window sensor from dierent locations using
your mobile data or another Wi-Fi connection.
History – records data of open/closed/tempered
alarms events.
Settings – for turning on/o notications.
Battery – Shows the remaining battery level.