Switch to the TEST position to enter the Test mode. In this mode
you can take pictures or video clips like a regular digital camera,
or enter the Menu to set up parameters. On the keypad there are
four “shortcut” functional keys (see Figure 2-1) working as below:
Figure 2.2
Press the key to set the camera to shoot video
Press the key to set the camera to take still
Press the SHOT key to manually trigger the shutter.
A photo or video (depending on the camera setting) will
be taken and saved to the SD card. If the display shows
“CARD PROTECTED” when you press the SHOT key,
switch the power OFF, remove the SD card and slide its
write-protect switch to off.
Press the REPLAY key to review/playback
photos/videos on the LCD screen, or a connected TV
monitor. Use and key to navigate.
There is another key, MENU, on the keypad that allows you to
program the camera to work the way you want. Please make
To Next Page
Loading...