batteries are connected, the camera will be powered by the
external one.
2.2 Insert SD Card
The camera does not come with internal memory. So it will not
work without a SD (Secure Digital) memory card or SDHC (High
Capacity) card. Before inserting the SD card into the card slot,
please make sure the write-protect switch on the side of the SD
card is “off” (NOT in the “Lock” position). The supported
memory capacity is up to 16GB. If you use a card capable of
above 16GB, make sure you test it before putting the camera in
use.
Figure 2.1
CAUTION: ALWAYS SWITCH THE CAMERA TO OFF
MODE BEFORE YOU INSTALL OR REMOVE THE
BATTERIES OR THE SD CARD.
2.3 Enter Test Mode
To Next Page
Loading...