Acoustics M 40 - LED States and Specifications; LED Status Indicators; Amplifier Performance; Speaker Specifications

10
EN
Operation
Amplier performance
Power output (<0.7% THD) ...................2 x 50W//4Ω
THD (at 1W//4Ω) .............................................<0.2%
Freq resp (DSP set at) ........... 20Hz to 20kHz ±1dB
S/N ratio (aux, A-Wtd, max vol, ref 50W) ....... >87dB
RCA input sensitivity (for 50W) ...................... 600mV
RCA max input ....................................................2.1V
Minijack input sensitivity (for 50W) ................ 350mV
Minijack max input ............................................1.25V
Sub out (100Hz, at 50W main channels) ............1.0V
Optical in .........................................................Toslink
Optical in max sample rate .................. 24bit/192kHz
USB in max sample rate ...................... 24bit/192kHz
Speakers
Enclosure type ......................... 2-way reex (ported)
Mid range driver ................................. 125mm (5.0in)
Tweeter ................................................. 22mm (0.9in)
Crossover frequency .......................................2.5kHz
Freq resp (free, -6dB) ...........................55Hz - 22kHz
Power
Supply voltage ........................ 100V - 240V, 50-60Hz
Maximum consumption ....................................200W
Standby consumption .............................. <0.5 Watts
Bluetooth®
Bluetooth specication .......................................V5.0
Music enhancements ...................... apt X, aptX HD®
SBC, AAC
Dimensions
(W x H x D) .................... 250mm x 710mm x 296mm
10” x 28” x 11
5
/
8
”
Weight
Amplied speaker ...........................................12.4kg
27lb 5oz
Passive speaker ..............................................11.8kg
26lb
Specication
LED states
Red System is in standby
Dark red System is in deep standby
White System is playing optical source
White, ashing Adjusting volume
White, double ash every 3 seconds The optical input is receiving multichannel or dolby digital audio
which cannot be played
Blue System is playing Bluetooth source
Blue, slow pulse No Bluetooth device connected
Blue ashing Bluetooth pairing mode
Blue, triple ash The Bluetooth pairing list has been cleared
Green System is playing analogue source
Yellow System is playing USB source
Source colour (white, blue, green,
yellow) pulsing
Muted