Acoustics M 40 - Feature Summary; Wired Connectivity; Wireless Connectivity; Acoustic Settings

4
EN
Wired connectivity
• Analogue audio input – Stereo phono sockets
or 3.5mm stereo jack allow a connection to an
external analogue audio source such as a CD
player
• Optical digital input - Allows connection to an
external digital audio source such as a TV
• Speaker output – Stereo 4mm sockets, allowing
connection from the amplied speaker to the
passive speaker
• USB – A USB type B socket, allowing connection
to a computer device
• Sub Out – A Phono subwoofer output for
connection to an external subwoofer.
Wireless connectivity
• Bluetooth® HD – An international wireless
connection used for streaming audio from all
compatible devices.
• AVRCP – A Bluetooth control protocol that
synchronises your device control of Volume and
Mute for easy integration of our Q Acoustics
speaker.
Feature summary
Acoustic
Left / Right position switch - Enables the amplied
speaker to be placed as the left or right speaker of
the pair, whichever is closest to a mains outlet.
EQ switch – User control of EQ setting for best
acoustic performance. This can be changed
dependent upon speaker position, or user
preference.
Fitting or replacing batteries
• Slide the battery cover off the remote control in
the direction shown.
• Lift the cover off the remote control.
• Remove the expired batteries (if necessary).
• Fit new batteries observing polarity as shown.
When replacing the batteries, use only the same
AAA (LR03) type.
Alkaline batteries are recommended. Other types of
battery may leak and cause damage.
Battery disposal
Dispose of used batteries with regard to the
recycling regulations in your area. Do NOT short
circuit batteries or throw them into water, the general
rubbish or in a re.
Remote batteries
AAA
AAA