Acoustics M 40 - Speaker Controls; Remote Control Overview

6
EN
1.
Puts system into standby, turns on to optical input
2.
Mutes / unmutes the speakers
3.
Pauses / plays the audio on Bluetooth or USB sources
4.
Short press decreases the volume by one step
Press and hold will continuously decrease the volume
5.
Short press increases the volume by one step
Press and hold will continuously increase the volume
6.
Skips a track back on Bluetooth or USB sources
7.
Skips a track forward on Bluetooth or USB sources
8. BLU
Selects Bluetooth input, sets system into pairing
mode with long press
9. OPT
Selects optical input
10. ANA
Selects analogue input
11. USB
Selects USB input
Speaker controls
Remote control
1. Standby / Source
Press to switch on, long press to set to standby
Press to change source
Very long press when in standby will enter deep
standby
2.
Press to decrease volume by a single step
Press and hold to decrease volume continuously
3.
Press to increase volume by a single step
Press and hold to increase volume continuously
NOTE: Press and together to set volume to 20%.
Key
USB
ANA
OPT
BLU
a
b
d
f
h
1)
c
e
g
i
1!
a
b
c