ƶƲ
ƹ.2 Indoor Unit ƹ.2.1 Duct Type
Removal and Assembly of Fan Motor
Remarks: Before removing the fan, make sure to cut off the power firstly.
Step Illustration Handling Instruction
1. Unplug the motor
cables
Cut off the power supply of indoor unit. Use
screwdriver to remove the electric box cover
and unplug the motor cables in electric box.
2. Remove the filter
sub-assembly and air inlet
cover board
Remove the filter sub-assembly from the air
inlet frame and use screwdriver to remove
the air inlet cover board.
3. Remove the screws on
fan sub-assembly.
4. Overturn the propeller
housing
5. Loosen the fan and
motor.
To Next Page
