ƶ
Table 3-1-2 Installation Accessories List for Duct-type Indoor Unit
Name & Shape Qty Notes
Installation and Operating Instructions 1
Insulation materials for gas pipe 1 Used for gas pipe connector on indoor unit
Insulation materials for liquid pipe 1 Used for liquid pipe connector on indoor unit
Insulation materials for drainage pipe 2 Used for wrapping the condensate pipe and rubber plug
Nut M8 with gasket 8 Use for fixing the hanger hook
4
4 sets, used for ceiling mounting of the indoor unit
Nut and spring gasket 4
Hook 4 Used for ceiling mounting of the indoor unit
Strap
4 or 8
pcs
4 pcs for 18kBtu/h unit and 8 pcs for others
Wired Controller 1
Remote Controller 1
Battery 2
Flexible Pipe
0.2 or 4
pcs
0 pcs for 18 kBtu/h unit; 2 pcs for 22.5,27kBtu/h unit; and 4
pcs for 36-45kBtu/h unit
Power Cord 1-2 pcs 2 pcs for 36-45kBtu/h unit and 1 pc for others
Connection Wire
1.1.5 Installation Clearance Data
Warning! The height of installation for the indoor unit should be 2.5m (8-1/5ft) above.
2500mm
(98-3/8inch)
Nut with
Washer
Nut Spring
Washer
250mm
(9-7/8inch)
250mm
(9-7/8inch)
Figure 3-1-7
To Next Page
Loading...
