To Next Page
R
Ryan PopeJul 28, 2025
What to do if my Acquaer AUP033-5 Water Pump does not start?
- TTiffany AcostaJul 28, 2025
If your Acquaer Water Pump doesn't start, several factors could be at play. First, the probes may be covered in debris; if so, clean the sensor probes. Also, check the fuse or breaker, replacing the fuse or resetting the breaker if necessary. Ensure the plug is securely connected. If the pump experienced a thermal overload, unplug it for 30 minutes and then plug it back in. Also, inspect the plug for corrosion and clean the prongs if needed. If the motor has failed, call 1-888-538-0082.
General
