J
Juan ColemanAug 3, 2025
What to do if my Acquaer Water Pump does not start?
- Ddiane99Aug 3, 2025
If your Acquaer Water Pump isn't starting, several factors could be at play. First, check the fuse and replace it if it's blown. Also, verify that the breaker hasn't tripped; if it has, reset it. Ensure the plug is securely connected. If the plug is corroded, clean the prongs. If the pump experienced thermal overload, disconnect it from power for 30 minutes before reconnecting. If none of these steps work, the motor may have failed, and you should contact customer service for a replacement.