T
tmartinJul 29, 2025
What to do if my Acquaer TRP010-2 does not start?
- MMarcus JacksonJul 29, 2025
If your Acquaer Water Pump isn't starting, several things could be the cause. First, check the fuse and replace it if it's blown. Second, see if the breaker has tripped and reset it if necessary. Third, make sure the plug is securely connected. Fourth, clean the plug prongs if they are corroded. Finally, if the motor overheated, unplug the power and wait for 30 minutes before plugging it back in.