ACS DRIVESAFE - Operation of the Breathalyzer; Powering On the Device; Ready Status Indicator; Performing a Breath Test

INSTRUCTION MANUAL6 DRIVESAFE 7
OPERATION
The DRIVESAFE personal breath alcohol tester is easy
to use and easy to understand.
On
Press the power button once to start the tester.
The WAITmessagewillappearbrieyduringthestartup
sequence.
Ready
The READY message will appear with a green backlight
when the tester is ready for use.
Test
Insert a new mouthpiece and blow steadily into it for 5
seconds.Atonewillsoundtoindicateaproperowof
breath.
Abort
A proper sample of breath was not provided. Test again.
Reading
To indicate the BrAC range, the display provides a digital
reading expressed in mg/L, together with a bar graph and
a colour backlight.
Off
The DRIVESAFE tester will automatically power down
after a period of inactivity. To turn it off manually, press
the power button twice in quick succession.