How to turn on Acson A5CK15CR Air Conditioner after power failure?
If your Acson Air Conditioner unit does not resume after a power failure, turn on the unit with the wireless or wired controller.
What to do if there is condensation on the front air grille of my Acson A5CK15CR?
If there's condensation on the front air grille of your Acson Air Conditioner's indoor unit, it's likely due to air humidity or a set temperature that's too low. Try increasing the temperature setting and operating the unit at a high fan speed to resolve this.
Why warm air does not come out of my Acson A5CK15CR on heating cycle?
If your Acson Air Conditioner is on a heating cycle and warm air isn't coming out, it's likely that the unit is in defrost mode. The heating operation will resume automatically after the defrost cycle ends.
What to do if Acson A5CK15CR compressor does not operate after starting?
The compressor in your Acson Air Conditioner is designed with a protection feature to prevent frequent starts. Please wait 3 to 4 minutes; the compressor should start operating on its own.
Why is the wireless controller display dim on my Acson Air Conditioner?
If the wireless controller display for your Acson Air Conditioner is dim, the batteries may be discharged or not correctly inserted, or the assembly might not be good. Check the batteries and their placement.
Why does my Acson Air Conditioner discharge airflow have a bad odor?
If the discharge airflow from your Acson Air Conditioner has a bad odor, it may be due to cigarettes, smoke particles, perfume, or other substances that have adhered to the coil. Contact your nearest dealer for assistance.
What causes hissing airflow sound from Acson Air Conditioner?
The hissing airflow sound you hear from your Acson Air Conditioner during operation is due to liquid refrigerant flowing into the evaporator coil.
General| Refrigerant | R32 |
|---|---|
| Outdoor Unit Noise Level | 52 dB(A) |
| Type | Split Type |
| Cooling Capacity | 12000 BTU/hr |
| Power Supply | 220-240V, 50Hz |
| Operating Temperature (Cooling) | 18°C to 43°C |
Explains the breakdown of the indoor unit model number.
Details the structure of the outdoor unit model designation.
Lists error codes displayed on the wired remote for diagnostics.
Lists common issues like no restart, slow airflow, or odors with possible causes.
Addresses condensation, water leakage, hissing sounds, and dim displays.
Troubleshooting continuous compressor operation or lack of cool/hot air.
To Next Page
