To Next Page
D
Dana DixonAug 4, 2025
How to turn on Acson A5CK30AR after power failure?
- JjohnvegaAug 4, 2025
If your Acson Air Conditioner unit does not resume after a power failure, turn on the unit with the wireless or wired controller.
How to turn on Acson A5CK30AR after power failure?
If your Acson Air Conditioner unit does not resume after a power failure, turn on the unit with the wireless or wired controller.
What to do if there is condensation on the front air grille of my Acson A5CK30AR Air Conditioner?
If there's condensation on the front air grille of your Acson Air Conditioner's indoor unit, it's likely due to air humidity or a set temperature that's too low. Try increasing the temperature setting and operating the unit at a high fan speed to resolve this.
Why warm air does not come out of my Acson Air Conditioner on heating cycle?
If your Acson Air Conditioner is on a heating cycle and warm air isn't coming out, it's likely that the unit is in defrost mode. The heating operation will resume automatically after the defrost cycle ends.
What to do if Acson Air Conditioner compressor does not operate after starting?
The compressor in your Acson Air Conditioner is designed with a protection feature to prevent frequent starts. Please wait 3 to 4 minutes; the compressor should start operating on its own.
Why is the wireless controller display dim on my Acson Air Conditioner?
If the wireless controller display for your Acson Air Conditioner is dim, the batteries may be discharged or not correctly inserted, or the assembly might not be good. Check the batteries and their placement.
Why does my Acson A5CK30AR discharge airflow have a bad odor?
If the discharge airflow from your Acson Air Conditioner has a bad odor, it may be due to cigarettes, smoke particles, perfume, or other substances that have adhered to the coil. Contact your nearest dealer for assistance.
What causes hissing airflow sound from Acson Air Conditioner?
The hissing airflow sound you hear from your Acson Air Conditioner during operation is due to liquid refrigerant flowing into the evaporator coil.
General| Cooling Capacity | 2.5 kW |
|---|---|
| Refrigerant | R410A |
| Power Supply | 220-240V, 50Hz |
| Noise Level (Outdoor) | 50 dB |
| Type | Split Air Conditioner |
| Outdoor Unit Noise Level | 50 dB(A) |
| Noise Level (Indoor) | 24 dB |
Explains ease of maintenance and the features of the microcomputer remote controller.
Details general functions like temperature, fan speed, timers, and on/off controls.
Explains specialized modes like sleep, personalized settings, clock, and operating modes.
Shows LED status indicators for various operations and states in cooling mode.
Shows LED status indicators for various operations and states in heatpump mode.
Lists error codes displayed on the wired remote for troubleshooting.
Outlines recommended maintenance tasks for air filters, indoor units, and coils.
Details maintenance for power supply, compressor, and oil requirements.
Lists essential checks and cleaning procedures before resuming operation after shutdown.
