How to restart Acson A5LCY 10DR after a power failure?
If your Acson Air Conditioner doesn't turn back on after a power outage, try turning on the unit using the wireless or wired controller. The auto-restart function might not be working.
Why is my Acson A5LCY 10DR blowing cold air on heating cycle?
If warm air isn't coming out of your Acson Air Conditioner during the heating cycle, it might be in defrost mode. The heating operation will resume once the defrost cycle is complete.
How to stop my Acson A5LCY 10DR Air Conditioner compressor from running constantly?
If your Acson Air Conditioner's compressor is running non-stop, try the following: * Clean the air filter. * If in cooling mode, set a higher temperature. * If in heating mode, set a lower temperature.
Why is my Acson Air Conditioner wireless controller display dim?
If the wireless controller display of your Acson Air Conditioner is dim, the batteries might be discharged, not correctly inserted, or the assembly is not good. Try replacing the batteries, ensuring they are correctly inserted, and checking the assembly.
What to do if my Acson Air Conditioner has condensation on the grille?
If you find condensation on the front grille of your Acson Air Conditioner, it could be due to high humidity or a very low temperature setting. Try increasing the temperature setting and running the unit at a high fan speed.
What to do if my Acson A5LCY 10DR is leaking water?
If water is leaking from your Acson Air Conditioner, it might be due to incorrect installation. Switch off the unit and contact your nearest dealer.
General| Refrigerant | R32 |
|---|---|
| Weight (Indoor Unit) | 9 kg |
| Noise Level (Indoor) | 38 dB(A) |
| Noise Level (Outdoor) | 50 dB(A) |
| Power Supply | 220-240V, 50Hz |
| Type | Split Air Conditioner |
| Cooling Capacity | 9, 500 BTU/h |
Guidelines for outdoor unit installation and electrical wiring connection.
Maintenance procedures and periods for various components.
Immediate actions for malfunctions and explanation of indicator lights.
Steps to diagnose errors using wireless and wired handsets.
List of error codes, descriptions, and recommended actions.
List of running parameters, descriptions, and unit/range.
To Next Page
