How to restart Acson A5LCY 25CR after a power failure?
If your Acson Air Conditioner doesn't turn back on after a power outage, try turning on the unit using the wireless or wired controller. The auto-restart function might not be working.
Why is my Acson A5LCY 25CR Air Conditioner blowing cold air on heating cycle?
If warm air isn't coming out of your Acson Air Conditioner during the heating cycle, it might be in defrost mode. The heating operation will resume once the defrost cycle is complete.
How to stop my Acson Air Conditioner compressor from running constantly?
If your Acson Air Conditioner's compressor is running non-stop, try the following: * Clean the air filter. * If in cooling mode, set a higher temperature. * If in heating mode, set a lower temperature.
Why is my Acson A5LCY 25CR Air Conditioner wireless controller display dim?
If the wireless controller display of your Acson Air Conditioner is dim, the batteries might be discharged, not correctly inserted, or the assembly is not good. Try replacing the batteries, ensuring they are correctly inserted, and checking the assembly.
What to do if my Acson A5LCY 25CR has condensation on the grille?
If you find condensation on the front grille of your Acson Air Conditioner, it could be due to high humidity or a very low temperature setting. Try increasing the temperature setting and running the unit at a high fan speed.
What to do if my Acson A5LCY 25CR Air Conditioner is leaking water?
If water is leaking from your Acson Air Conditioner, it might be due to incorrect installation. Switch off the unit and contact your nearest dealer.
General| Brand | Acson |
|---|---|
| Model | A5LCY 25CR |
| Category | Air Conditioner |
| Language | English |
Explains the coding for indoor unit models based on their features and specifications.
Explains the coding for outdoor unit models based on their features and specifications.
Specifies the allowable operating temperature and humidity ranges for optimal performance.
Technical data and specifications for various safety devices incorporated in the units.
Electrical connection diagrams for various heat pump outdoor and indoor unit models.
Explanation of LED indicator lights on the unit and their operational or fault meanings.
Procedures for diagnosing unit errors using wireless and wired remote controllers.
Comprehensive list of error codes, descriptions, and recommended actions for troubleshooting.
To Next Page
