To Next Page
D
denisealvarezAug 4, 2025
How to turn on Acson Air Conditioner after power failure?
- TTracy ThomasAug 4, 2025
If your Acson Air Conditioner unit does not resume after a power failure, turn on the unit with the wireless or wired controller.
How to turn on Acson Air Conditioner after power failure?
If your Acson Air Conditioner unit does not resume after a power failure, turn on the unit with the wireless or wired controller.
What to do if there is condensation on the front air grille of my Acson A5CK25AR?
If there's condensation on the front air grille of your Acson Air Conditioner's indoor unit, it's likely due to air humidity or a set temperature that's too low. Try increasing the temperature setting and operating the unit at a high fan speed to resolve this.
Why warm air does not come out of my Acson Air Conditioner on heating cycle?
If your Acson Air Conditioner is on a heating cycle and warm air isn't coming out, it's likely that the unit is in defrost mode. The heating operation will resume automatically after the defrost cycle ends.
What to do if Acson Air Conditioner compressor does not operate after starting?
The compressor in your Acson Air Conditioner is designed with a protection feature to prevent frequent starts. Please wait 3 to 4 minutes; the compressor should start operating on its own.
Why is the wireless controller display dim on my Acson Air Conditioner?
If the wireless controller display for your Acson Air Conditioner is dim, the batteries may be discharged or not correctly inserted, or the assembly might not be good. Check the batteries and their placement.
Why does my Acson Air Conditioner discharge airflow have a bad odor?
If the discharge airflow from your Acson Air Conditioner has a bad odor, it may be due to cigarettes, smoke particles, perfume, or other substances that have adhered to the coil. Contact your nearest dealer for assistance.
What causes hissing airflow sound from Acson A5CK25AR?
The hissing airflow sound you hear from your Acson Air Conditioner during operation is due to liquid refrigerant flowing into the evaporator coil.
Defines variations in product specifications.
Specifies the type of connection used for the unit.
Details the electrical specifications of the unit.
Identifies the model type, e.g., Heatpump or Cooling Only.
Indicates the product series, e.g., A, B, or C Series.
Specifies the cooling/heating capacity in Btu/h.
Provides the specific model name, e.g., CK for Ceiling Cassette.
Indicates the type of refrigerant used in the unit.
Specifies the brand of the air conditioner.
Identifies the model type, e.g., Heatpump or Cooling Only.
Indicates the product series, e.g., C Series.
Specifies the cooling/heating capacity in Btu/h.
Instructions for adjusting the desired room temperature.
How to select different operating modes like COOL, HEAT, DRY, FAN.
Maintenance steps for the indoor unit's air filter.
Steps for checking running current, voltage, and wiring.
Checks for refrigerant leaks related to the compressor.
Checklist for maintenance after extended shutdown periods.
General| Type | Split |
|---|---|
| Refrigerant | R410A |
| Weight (Indoor Unit) | 8 kg |
| Power Supply | 220-240V, 50Hz |
| Cooling Capacity | 25000 BTU/h |
| Outdoor Unit Noise Level | 56 dB(A) |
