General Data - Cooling Only (R22)
ACC 75D ACC 100D
AMC 75D AMC 100D
Btu/h 75000 95000
W 21960 27820
W 8471 10822
A 16.30 19.40
V/Ph/Hz 380 - 415 / 3 / 50 380 - 415 / 3 / 50
W/W 2.71 3.01
l/s / CFM 1142 / 2420 1487 / 3150
l/s / CFM 1156 / 2450 1477 / 3130
l/s / CFM 944 / 2000 1340 / 2840
l/s / CFM 793 / 1680 1057 / 2240
EXTERNAL STATIC PRESSURE (SH/H/M/L) Pa (in.wg.)
dBA 52 / 52 / 48 / 43 55 / 54 / 52 / 48
mm/in 430 / 16.9 430 / 16.9
mm/in 1426 / 56.1 1655 / 65.2
mm/in 826 / 32.5 826 / 32.5
mm/in 612 / 24.1 612 / 24.1
mm/in 1535 / 60.4 1765 / 69.5
mm/in 974 / 38.3 974 / 38.3
kg/lb 92 / 203 119 / 262
mm/in 25.4 / 1.0 25.4 / 1.0
l/s / CFM
dBA
mm/in
mm/in
mm/in
mm/in
mm/in
mm/in
kg/lb 170 / 374 184 / 405
LIQUID mm/in 12.7 / 1/2 15.9 / 5/8
GAS mm/in 25.6 / 1-1/8 25.6 / 1-1/8
kg/lb 6.70 / 14.77 10.50 / 23.15
REFRIGERANT CONTROL (EXPANSION DEVICE)
EER
INDOOR TXV
196 / 137 / 98 / 69 (0.79 / 0.55 / 0.39 / 0.28)
HIGH
MEDIUM
INDOOR UNIT
R22
REFRIGERANT CHARGE
UNIT WEIGHT
PIPE CONNECTION
TYPE
SIZE
PACKING DIMENSION
HEIGHT
WIDTH
DEPTH
HEIGHT
WIDTH
DEPTH
UNIT DIMENSION
SOUND PRESSURE LEVEL
PACKING DIMENSION
HEIGHT
WIDTH
DEPTH
UNIT WEIGHT
AIR FLOW
CONDENSATE DRAIN SIZE
MODEL
OUTDOOR UNIT
LOW
INDOOR UNIT
NOMINAL CAPACITY
NOMINAL TOTAL INPUT POWER
NOMINAL RUNNING CURRENT
POWER SOURCE
REFRIGERANT TYPE
AIR DISCHARGE
UNIT DIMENSION
HEIGHT
WIDTH
DEPTH
BRAZING
OUTDOOR UNIT
DUCTED
OPERATION SLM WIRED HANDSET
CONTROL
AIR FLOW
SUPER HIGH
SOUND PRESSURE LEVEL (H/M/L)
3304 / 7000
1150 / 45.3
1224 / 48.2
981 / 38.62
64
1175 / 46.3
981 / 38.62
1041 / 40.98
1) ALL SPECIFICATIONS ARE SUBJECTED TO CHANGE BY THE MANUFACTURER WITHOUT PRIOR NOTICE.
2) ALL UNITS ARE BEING TESTED AND COMPLY TO ARI 210/240-94.
3) NOMINAL COOLING AND HEATING CAPACITY ARE BASED ON THE CONDITIONS BELOW :
COOLING - 26.7°C DB / 19.4°C WB INDOOR AND 35.0°C DB / 23.9°C WB OUTDOOR
4) SOUND PRESSURE LEVEL ARE ACCORDING TO JIS B 8615 STANDARD. POSITION OF THE MEASUREMENT POINT IS 1m IN FRONT AND
1m BELOW THE UNIT.
5) EER/COP CALCULATION IS BASED ON EFFECTIVE POWER INPUT AS PER ISO 5151.
6. ENGINEERING & PHYSICAL DATA
To Next Page
Loading...
Need help?
General
