ACT PRO 1030 - User Manual

The above diagram is valid only
for clock-and-data type readers.
ACT1050 Pin and Proximity
Reader (Entry)
ACT1030 Proximity
Reader (Exit)
Wire both readers in parallel but leave
the SENSE line on the Exit reader unconnected.
Controller
Sense
Clock
Data
+5v
0v
Red Led
Grn Led
Card/Prox Reader
2 31
5 64
8 97
0
White
Green
Blue
Red
Black
Brown
Yellow
Orange
Sense
Clock / Data1
Data / Data 0
+5v
0v
Red Led
Grn Led
(Buzzer Ctrl)
Wiring for Clock and Data / Wiegand Reader
The +5V reader supply on ACT controllers is normally rated
at 100mA. Typically this is sufficient to power 2 ACT readers.
Note however that readers from other manufacturers may need
to be powered separately if their current requirements exceed
this or if they require 12V.
The standard wiring colours for
ACTPro Proximity and Pin readers
is shown above. Readers
should be a maximum of 30m
from the controller when powered
from +5V and a maximum of 100m
when powered from +12V.
OMRON
5A 250VAC
5A 30VDC
OMRON
1A 125VAC 1A 30VDC
5-12V dc
0V
0 1 2 3 4 5 6 7 8 9
B AT C H:
P R ODU CT :
S E R IAL NU MB ER :
02X X-1
AC TP ro R E V1.3
00X XXX
Data / D0
Clock / D1
Sense
R ed L ED
Grn L ED
B uzz Ctrl
Internal buzzer is
activated by applying
0V to Buzz Ctrl
Rear view of ACTPro 1040/1050/1060
connected to the ACT2000/1000/DS100
For Wiegand readers .
Wire both readers in parallel but connect D0
line of the exit reader into the SENSE line on
the controller,leave the SENSE line on the
Exit reader unconnected.
U nit 8 Tallaght B us ines s Centre, W hitestown, T allaght, Dublin 24, Ireland.
Telephone: 353 1 462 2585. T elefax: 353 1 462 2587. E -m ail: sales@ acces s control.ie W eb: www.acces scontrol.ie
Wiring for Entry/Exit Readers
ACTPro Product Range
1030/1040/1050/1060
Downloaded from: http://www.guardianalarms.net

Summary

Reader Wiring and Connections

ACT1050 Pin and Proximity Reader (Entry)

Diagram and wiring details for ACT1050 Entry reader, showing parallel connection of readers.

ACT1030 Proximity Reader (Exit)

Diagram and wiring details for ACT1030 Exit reader, showing parallel connection with SENSE line.

Wiring for Clock and Data; Wiegand Reader

Standard wiring colors and cable guide for Clock/Data and Wiegand type readers.

Rear View of ACTPro 1040;1050;1060

Shows rear view of ACTPro readers connected to ACT2000/1000/DS100 controller.

Mounting Instructions

Flush Mount Unit Installation

Instructions for mounting the unit in a flush mount box with spacer adjustments.

Surface Mount Unit Installation

Instructions for mounting the unit using a surface mount collar and security screw.

ACT PRO 1030 Specifications

General

Brand	ACT
Model	PRO 1030
Category	Keypad
Language	English