Need help?Do you have a question about the ACT 5 PROX and is the answer not in the manual?
Enter programming mode using keypad and default code.
Modify the PIN code for the first user.
Register a proximity card for the first user.
Update the master programming code for the unit.
Exit programming mode via keypad.
Document user details, PINs, and card numbers.
Describes the unit's construction, backlighting, and programming via keys.
Emphasizes recording user PINs and cards in a user list.
Step-by-step guide to changing user PIN codes.
Process for adding proximity cards to the system.
Procedure to change the unit's programming code.
Configure the duration the door strike remains active.
Set the door to toggle or timed relay mode.
Remove a specific user's card from the system.
Remove a specific card number from the system.
Verify if a user has a PIN code assigned.
Verify if a user has a card assigned.
Configure various operational options like entry modes and backlighting.
Diagram showing connections for door strike lock operation.
Diagram illustrating connections for magnetic lock operation.
Guidance on installing the unit in a flush mount configuration.
Guidance on installing the unit using a surface mount collar.
To Next Page
General
