16
17
MAINS POWER OPTION
If you want to use the REVITIVE when the battery is low or to preserve
the battery level the REVITIVE can be used by connecting it to an
electrical socket.
a Locate the AC/DC power adapter.
b Plug the small end of the power cord into the
opening on the side of the REVITIVE.
c Plug the power adapter into the nearest electrical
socket. This will start charging the (integrated)
rechargeable battery.
Once you have connected REVITIVE to the electrical socket follow Step 4
Using The Foot-pads or Step 5 Using the Electrode Body Pads to continue
setting up REVITIVE.
Instructions for use
STEP 4:
USING THE FOOT-PADS
a Get into a comfortable seated position.
For best results sit with your knees at a 90 degree angle
(right angle).
b Place REVITIVE on the floor in front of you.
REVITIVE is designed to be used while seated.
Never stand on the REVITIVE unit.
c Place both bare feet on the foot-pads.
Make sure you remove all footwear, including socks/
stockings.
d If desired, apply a moisturizing lotion to the soles of
your feet.
Hint: Applying a moisturizing lotion to the soles of the
feet before using REVITIVE can help improve the
delivery of electrical stimulation.
e Press the power button on the device or on the remote
control to turn REVITIVE on.
You will hear a beep and the display lights will light up.
The time will read 30 minutes and Intensity will
read 00.
To turn off REVITIVE at any time during operation,
press the power button on the device or on the
remote control.
Sit with
both bare feet
on the foot-pads
To Next Page
Loading...
