Acteon SOPRO 717 FIRST - Dock M_USB2 Connection; Sopro Imaging Software Installation

ENGLISH
SOPRO 717 First • User’s manual
17
7.2. DOCK M_USB2 CONNECTION
• Connect the USB cable between the connection box and one of the computer USB ports.
• Connect the connecting cable between the connection box and the handpiece.
• If you prefer using a footswitch rather than SoproTouch to freeze the image, you just have to connect the footswitch (optional) to
the connection box. With this confi guration, SoproTouch is inhibited.
• Connect the power supply to the outlet, and then, to the connection box (the green indicator light should be on).
7.3. DOCK MU_USB2 OR DOCK U_USB2 CONNECTION
• Refer to DOCK MU_USB2 / DOCK U_USB2 integration manual.
• Connect the connecting cable to the handpiece.
• Connect the USB cable between the connection box and one of the computer USB ports.
7.4. DOCK USB2 CONNECTION
• Connect the USB cable to one of the computer USB ports.
• Connect the connecting cable to the handpiece.
7.5 SOPRO IMAGING SOFTWARE INSTALLATION
Refer to the Sopro Imaging owner’s manual that is on the Sopro Imaging CD-ROM in the document directory.
7.6. SOPRO IMAGING SOFTWARE CONFIGURATION WITH THE CAMERA
Refer to the Sopro Imaging owner’s manual that is on the Sopro Imaging CD-ROM in the document directory.