Need help?Do you have a question about the Acteon X-MIND prime 3D ceph and is the answer not in the manual?
Provides contact details and information required for technical service interventions.
General warnings and precautions for the safe use and operation of the device.
Details on radiation protection measures and recommended distances.
Provides a block diagram illustrating the system's architecture and component connections.
Specifies the main electrical characteristics and connection requirements.
Provides necessary room dimensions and clearance for installation.
Step-by-step instructions for the mechanical mounting of the unit.
Procedure for installing the correct fuses based on voltage range.
Details on making the mains power supply and X-RAY button connections.
Guides for configuring network interface boards for PC connectivity.
Instructions for installing the required AIS software for the unit.
Steps to verify the correct operation of the panoramic imaging function.
Procedure to verify the correct functionality of the 3D imaging system.
Steps for adjusting and verifying the cephalometric (ceph) device function.
Methods for checking exposure parameters (kV, time, dose) using invasive or non-invasive techniques.
Function to disable X-ray emission or set a corrective factor for DAP dose.
Procedures for accessing and modifying machine configuration settings.
Explanation of operational and error messages displayed by the GUI.
Troubleshooting for errors related to the MCU board and its firmware.
Procedure for upgrading the MCU and CCU board firmware.
Instructions for replacing components such as fuses, boards, and the tubehead.
General| Imaging Technology | Cone Beam Computed Tomography (CBCT) |
|---|---|
| Software | ACTEON Imaging Suite |
| Sensor Type | Flat Panel Detector |
| Reconstruction Time | Less than 2 minutes |
| Cephalometric | Yes |
| 3D Dose Reduction Technology | Yes |
| Weight | Varies by model |
| Power Requirements | 110-240 V, 50/60 Hz |
| Type | 3D Cephalometric Imaging System |
To Next Page