4.
DESCRIPTION
4.1
Functions, models and versions
X-MIND prime 3D, manufactured by de Götzen, is a complete panoramic X-ray
system that can perform the following exams:
•
Panoramic adult or child exams, with 3 sizes and 3 types of biting for a total of
18 combinations with automatic selection; with manual selection, it is possible
to select a high voltage between 60kV and 86kV, in 2kV steps and anodic current
from 2 mA to 12.5 mA in the R20 scale steps.
•
Sinus mode makes it possible to take exams of the paranasal sinuses with front
projection (postero/anterior).
•
TMJ closed/open mouth in lateral projection.
•
Right or Left Half Panoramic, to be used when the patient is known to have a
problem only on one side of the arch, in order to reduce radiation.
•
Low dose Panoramic, which reduces the dose radiated by excluding the TMJ's
ascending rami from the radiograph.
•
Frontal dentition, for a radiograph of the front part (roughly from canine to
canine).
•
Ortho Rad Panoramic with improved orthogonality, which reduces teeth
overlap, thereby improving the diagnosis of interproximal decay.
•
Bitewing Left or Right, for lateral dentition (generally from eighth to fourth)
with a trajectory that reduces teeth overlap.
•
Bilateral Bitewing (Left and Right), which sequentially performs both bitewings,
showing them on the same image.
•
3D Full Dentition (FOV 85 x 93 mm) with 3 sizes for a total of 6 combinations
with automatic selection; with manual selection, it is possible to select a high
voltage between 60kV and 86kV, in 2kV steps and anodic current from 2 mA to
12.5 mA in the R20 scale steps.
•
3D Single Jaw (FOV 85 x 50 mm) with two different FOV positions (Maxillary,
Mandibular), and 3 sizes for a total of 12 combinations with automatic selection;
with manual selection, it is possible to select a high voltage between 60kV and
86kV, in 2kV steps and anodic current from 2 mA to 12.5 mA in the R20 scale
steps.
•
3D Mandibular Teeth (FOV 50 x 50 mm) with five different FOV positions
(Frontal, Pre-Molars and Molars), and 3 sizes for a total of 30 combinations with
automatic selection; with manual selection, it is possible to select a high voltage
between 60kV and 86kV, in 2kV steps and anodic current from 2 mA to 12.5 mA
in the R20 scale steps.
•
3D Maxillary Teeth (FOV 50 x 50 mm) with five different FOV positions (Frontal,
Pre-Molars and Molars), and 3 sizes for a total of 30 combinations with
automatic selection; with manual selection, it is possible to select a high voltage
To Next Page
Loading...
