Need help?Do you have a question about the Acteon X-MIND prime and is the answer not in the manual?
Covers general warnings, device design compliance, and manufacturer liability.
Details device usage, maintenance, electrical safety, and cleaning precautions.
Covers protection measures for individuals present during X-ray emission.
Emphasizes compliance with laws and recommended distances for protection.
Lists essential steps for securing the system against cyber threats.
Covers device type, manufacturer, class, voltage, current, and power consumption.
Provides specifications for the tube-head assembly and different X-ray tubes.
Lists mandatory hardware and monitor specifications for system operation.
Lists compliance standards and details regulatory approvals and device classification.
Detailed steps for verifying image geometry and signal-to-noise ratio.
Explains the process for performing dosimetry tests, intended for authorized personnel.
Covers turning the device ON/OFF and the purpose of the emergency button.
Provides a sequential procedure for conducting a dental X-ray examination.
Covers patient positioning, device setup, exam types, and exposure values.
General and step-by-step guidelines for patient positioning and instructions.
Steps for performing the X-ray exposure, safety measures, and post-exposure actions.
Comprehensive table of default exposure parameters for various exam types.
Lists error codes related to main board, motors, and collimator.
General| Technology | Digital radiography |
|---|---|
| Generator | High-frequency generator |
| Tube Voltage | 60-70 kV |
| Tube Current | 7 mA |
| Voltage Range | 60-70 kV |
| Sensor Type | CCD/CMOS |
| Total Filtration | 2.5 mm Al equivalent |
| Compatibility | Compatible with various dental imaging software |
| Exposure Time | 0.02-1.2 seconds |
To Next Page