Acteon X-MIND prime - Information about Electromagnetic Compatibility

User Manual – Safety information
USER MANUAL • X-MIND prime • (19) • 01/2020 • NXMPEN010C
11
3.3 Information about Electromagnetic Compatibility
Medical electrical equipment needs special precautions regarding EMC and needs to be
installed and put into service according to the EMC information provided in the
accompanying documents.
Portable and mobile RF communications equipment can affect medical electrical
equipment.
The equipment can be installed both in professional buildings (e.g. hospitals or clinics)
and in residential buildings. Residential buildings, according to IEC 60601-1-2 4th
edition, are intended to be connected to dedicated power supply system (normally fed
by separation transformers).
For the purpose of EMC environment classification according to IEC 60601-1-2 4th
edition, both installations are classified as "Professional healthcare facility environment".
The EMISSIONS characteristics of this equipment make it suitable for use in industrial
areas and hospitals (CISPR 11 class A). If it is used in a residential environment (for
which CISPR 11 class B is normally required) this equipment, even if it is usually
permanently installed in X-Ray shield locations, might not offer adequate protection to
radio-frequency communication services. If abnormal performance is observed, such as
degradation of essential performance in the form of lack of accuracy of exposure
parameters and lack of reproducibility of exposure parameter, additional measures may
be necessary, such as re-orienting or relocating the device.
Warning
The use of cables other than:
 Ethernet cable CAT.5E L=5 m - code 5007090100
 Ethernet cable CAT.5E L=10 m - code 5007090300
with the exception those sold by the manufacturer of the equipment or system
as replacement parts for internal components, may result in increased emission
or decreased immunity of the equipment or system.
Warning
X-MIND prime should not be used adjacent to or stacked with other equipment;
if adjacent use is necessary, X-MIND prime has to be observed to verify if it
operates in a normal way.
Interference may occur in the vicinity of equipment marked with the symbol
.
Warning
Portable and mobile RF communications equipment should be used no closer
to any part of X-MIND prime, including cables. Minimum distance 30 cm.