User Manual – General instructions for use
USER MANUAL • X-MIND prime • (19) • 01/2020 • NXMPEN010C
8.7 Anatomic / Manual exposure
Note
If the previous exam was carried out manually, press the "Size Selection" key
to return to automatic mode.
After setting the equipment, the following two operating modes may be chosen:
•
ANATOMIC: with the kV and mA values programmed on the basis of the type of
patient and size.
•
MANUAL: with the possibility to vary the kV and mA values already set.
Note
The exam parameters set as the default are values to be taken as the starting
point. Users can optimise the parameters according to their needs.
To Next Page
Loading...
