between 60kV and 86kV, in 2kV steps and anodic current from 2 mA to 12.5 mA
in the R20 scale steps.
•
3D TMJ (FOV 85 x 93 mm) with two different FOV positions (R or L), 3 sizes for a
total of 12 combinations with automatic selection; with manual selection, it is
possible to select a high voltage between 60kV and 86kV, in 2kV steps and
anodic current from 2 mA to 12.5 mA in the R20 scale steps.
•
3D Sinus (FOV 85 x 93 mm) with 3 sizes for a total of 6 combinations with
automatic selection; with manual selection, it is possible to select a high voltage
between 60kV and 86kV, in 2kV steps and anodic current from 2 mA to 12.5 mA
in the R20 scale steps.
•
3D Extended Volumes (FOV 116 x 103 mm) with 3 sizes for a total of 6
combinations with automatic selection; with manual selection, it is possible to
select an high voltage between 60 kV and 86 kV, in 2 kV steps and anodic
current from 2 mA to 12.5 mA in the R20 scale steps.
•
3D Airways (FOV 116 x 103 mm) with 3 sizes for a total of 6 combinations with
automatic selection; with manual selection, it is possible to select a high voltage
between 60 kV and 86 kV, in 2 kV steps and anodic current from 2 mA to 12.5
mA in the R20 scale steps.
•
Cephalometric L-L projections in the formats 18x24, 24x24, 30x24 and 18x18, 24x18,
30x18; the selection between HS High Speed and HD High Definition is available.
•
Cephalometric A-P projections in the format 24x24 and 24x18 the selection between
HS High Speed and HD High Definition is available.
•
Carpus Projection in the format 18x24, only in HD High Definition mode.
Note of cephalometric image formats:
For user convenience, the ceph projections are named following the conventional format of
the film-cassettes (24 cm), although the vertical active area of the cephalometric sensor is
22.8 cm.
To Next Page
Loading...
