Acteon designs and manufactures its devices in compliance with safety
requirements; furthermore, it supplies all information necessary for correct use,
and warnings related to dangers associated with X-ray generating units.
Acteon cannot be held liable for:
•
Use of X-MIND prime 3D other than its intended use
•
Damage to the unit, the operator or the patient, caused both by installation
and maintenance procedures other than those described in this Manual and in
the Service Manual supplied with the unit, and by erroneous operations
•
Mechanical and/or electrical modifications performed during and after the
installation, other than those described in the Service Manual.
Installation and any technical operations must only be performed by qualified
technicians authorised by Acteon.
Only authorised personnel may remove the covers and/or have access to live
components.
Warning
In compliance with the IEC 60601-1 standard, the modification of the
equipment or its parts is strictly prohibited.
To Next Page
Loading...
