2.2.2.4 IEEE 802.1X
The IEEE 802.1X setting can be found under this path: System> Security>
IEEE 802.1X.
The camera is allowed to access a network protected by 802.1X/EAPOL
(Extensible Authentication Protocol over LAN).
Choose <On> to enable the IEEE 802.1X function.
Select one among the four protocol types: <EAP-MD5>, <EAP-TLS>,
<EAP-TTLS> and <EAP-PEAP>.
Users need to contact with the network administrator for gaining certificates,
usernames and passwords.
CA Certificate
The CA certificate is created by the Certification Authority for the purpose of
validating itself. Upload the certificate for checking the server’s identity.
Client Certificate / Private Key
Upload the Client Certificate and Private Key for authenticating the camera
itself.
Settings
⚫ Identity
Enter the user identity associated with the certificate. Up to 16
characters can be used.
⚫ Private Key Password
Enter the password (maximum 16 characters) for user identity.
Save IEEE 802.1X
Click on <Save> to save the IEEE 802.1X/EAP- TLS setting.
To Next Page
Loading...
