If there are constant dynamic changes in the scene, it is suggested
just adjust <GOV Length> and disable <Dynamic GOV>.
Click on <Save> to confirm the setting.
Bitrate
⚫ 8M Models (F/B/K/6)
The default setting of the H.265/H.264 bitrate for Stream 1 is 12288
kbit/s; for Stream 2 is 4096 kbit/s; for Stream 3/ Stream 4 is 2048 kbit/s.
The setting range is from 64 to 20480 kbps, and the total bit rate should
not exceed 51200 kbps.
⚫ Stitching Bullet Model (3)
The default setting of the H.265/H.264 bitrate for Stream 1 is 12288
kbit/s; for Stream 2 is 4096 kbit/s. The setting range is from 64 to 20480
kbps, and the total bit rate should not exceed 40960 kbps.
⚫ Fisheye Model (8)
The default setting of the H.265/H.264 bitrate for Stream 1/ Stream 2 is
4096 kbit/s. The setting range is from 64 to 20480 kbps, and the total bit
rate should not exceed 40960 kbps.
To Next Page
Loading...
