Horizontal Calibration
This item is for users to calibrate images counterclockwise / clockwise.
NOTE: This item is only available when <Back End Software
Dewarping> is selected in <Fisheye Dewarping Type> and <Wall
Mount> is selected in <Installation>.
⚫ Counterclockwise
Users can click on the <1> or <10> button to calibrate the image
counterclockwise one degree or ten degrees.
⚫ Clockwise
Users can click on the <1> or <10> button to calibrate the image
clockwise one degree or ten degrees.
To Next Page
Loading...
